NTC ADSL Configuration Working Way

To configure ADSL setting in a ADSL Router, you need to enter the following informations .


The (generic) easy steps :


1) Open 192.168.1.1 (in most routers) in router,
        use admin for username and admin for password (If it doesnot work, refer to the manual of router, the login information can be found on back of router)

2) Search for the ADSL settings page in the router config -
For Routing Mode (where router automatically dials the connection), You need to provide/choose the following minimum settings there

>Choose PPPOE LLC for Connection type or encapsulation
>Enter correct username and password given by NTC
>Choose authentication AUTO
>provide 8 for VPI, and 81 for VCI

3) Save the connection settings and restart the router.
4) Make sure all the LEDS including internet is ON.